Solutions

One method.
Every tired surface.

Architectural film goes where replacement is too slow and too expensive: doors, elevator cabs, landings, millwork, walls, ceilings, and storefronts.

Same structure
New finish

Tailored architectural finishes

The surface stays. The finish changes.

Every scope below is installed over the existing substrate, with the hardware, frames, and structure left in place. Occupants keep using the building.

01 — Hours per leaf

Commercial Doors

We remove the hardware, wrap the leaf and frame in place, and rehang the same door. Guest-room and corridor doors, closet and service doors, fire-rated assemblies where the film is specified to local code. Most properties are done floor by floor, at night, with rooms back in service the next morning.

Guest-room, corridor, and fire-rated doors. Typically $350–$600 per door vs. $980–$1,900 to replace.

02 — 1–2 days per cab

Elevator Interiors

The cab takes more abuse than any other surface in the building. We wrap the panels, reveals, and ceiling in Class A rated architectural film and protect the handrails and sills. Cabs are typically out of service one to two days, one at a time, so vertical transportation keeps running.

Cab walls and panels. Typically $5,000–$10,000 vs. $50,000+ to replace a cab. Most cabs take 1–2 days.

03 — Per landing

Elevator Landings

Landing doors and jambs get the same finish as the cab, so the ride and the arrival match. Frames and lobby surrounds are wrapped in place. No door replacement, no new hardware, no elevator modernization schedule.

Landing doors, frames, and lobby surrounds. The look of a new bank without a modernization.

04 — Overnight rebrands

Casework & Millwork

Reception desks, nurse stations, credenzas, and built-in shelving resurfaced in wood, stone, metal, or solid finishes. The millwork stays; the finish, edgeband, and reveal change. A rebrand lands overnight instead of after a millwork package.

Reception desks, cabinets, and built-ins. Rebrand without new carpentry.

05 — Corridor scale

Wall Surfaces

Corridor and lobby walls, column wraps, and feature panels in wood, stone, textile, and metal looks at architectural scale. Installed in occupied buildings with negative-air containment and daily clean-up.

Corridor and lobby walls, without a renovation close.

06 — Soffits & bulkheads

Ceilings & Hallways

Ceilings, soffits, and bulkheads wrapped in place. Wood-look ceilings, metal soffits, and textile panels that would otherwise mean demolition, scaffold, and a closed floor.

Wood, stone, metal, and textile looks at corridor and lobby scale.

07 — Exterior grade

Storefront & Building Wrap

Storefront columns, entry frames, mullion covers, and facade elements wrapped in exterior-grade film. Brand refreshes and repositioning without pulling the storefront apart or closing the doors.

Columns, frames, and facade elements. The business stays open.

How it works

Four steps, no surprises.

Scope it, sample it, install around operations, then hand it back clean.

Step 1

Consult

We walk the surfaces, confirm they will take film, and define scope, schedule, and budget.

Step 2

Specify

You pick from 1,000+ finishes across 3M DI-NOC, Belbien, Reatec, Benif, Bodaq, and Renuva. Samples ship before you commit.

Step 3

Install

In-house crews prep, wrap, and edge-seal around your operations. Nights, weekends, or floor by floor.

Step 4

Walkthrough

Every edge, corner, and seam is checked before we turn the surface back over.

Surface deeper.™

Have a floor, a cab, a storefront, or a full property?

Tell us what you are working with. We will tell you if film is the right call, and if it is not.